Figure 10: An-30 Terminal Connected To Switch / Router / Hub; Figure 11: An-30 Terminal Connected To Host Computer - Redline AN-30 System User Manual

AN-30 System User Manual

Figure 10: AN-30 Terminal Connected To Switch / Router / Hub

The AN-30 terminal may also be connected directly to the host computer, as shown in
Figure 11. In this configuration, a straight-through CAT 5/UTP cable is required to
complete the connection.

Figure 11: AN-30 Terminal Connected To Host Computer

To help you establish other implementations that are not addressed in this manual, Figure
12 provides an illustration of the pinout for the AN-30 terminal LAN interface.
Warning: do not connect a telephone cable to the AN-30 LAN interface, as this will
damage the terminal.
Page 24 of 80
Redline Communications .....solving the first mile challenge