Table of Contents
Advertisement
NOTICE
1 - The AN-30 System is used as a fixed wireless TDM and Ethernet bridge that requires
professional installation with specified antennas and output power levels certified under
the FCC Grant for AN-30 System for Point-to-Point or Point to Multipoint mode of
operations.
2 - FCC RF Exposure Requirements - The antenna(s) used for this transmitter must be
fixed-mounted on outdoor permanent structures with a separation distance of at least 3.0
meters (9.3 feet) from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.
3 - The AN-30 System is certified by the FCC and Industry Canada with 5.8 GHz
directional antennas, listed below:
Table 1: FCC and Industry Canada Certified 5.8GHz Antennas
Model Number
486001
485002
485024
484027
484026
484025
SP4-5.2
SP3-5.2
SP2-5.2
SP1-5.2
SEC-55V-60-17
SEC-55V-90-16
MPR58031PTNF
MPR58029PTNF
TDJ-5818AM-60
TDJ-5816AM-90
Note: For the most current FCC / IC approved antenna list please visit our web site at
www.redlinecommunications.com
4 - For fixed, point-to-point mode of operations, the transmitting antennas are specified in
the above table; the use of omni-directional antenna is prohibited for point-to-point
operation.
Redline Communications
Antenna Gain, dBi
Antenna Type
28.0
Directional, planar array
23.0
Directional, planar array
21.0
Directional, flat panel
14.0
Directional, flat panel
15.0
Omni Directional, flat panel
14.0
Omni Directional, flat panel
34.8
Directional, parabolic
31.2
Directional, parabolic
29.0
Directional, parabolic
22.5
Directional, parabolic
17.0
Directional, sector
16.0
Directional, sector
31.0
Directional, parabolic
29.0
Directional, parabolic
18.0
Directional, sector
16.0
Directional, sector
Page 26 of 80
AN-30 System User Manual
Application
PMP & PTP
PMP & PTP
PMP & PTP
PMP & PTP
PMP
PMP
PMP & PTP
PMP & PTP
PMP & PTP
PMP & PTP
PMP & PTP
PMP & PTP
PMP & PTP
PMP & PTP
PMP & PTP
PMP & PTP
.....solving the first mile challenge
Advertisement
Table of Contents
