Adding Room Devices - Danfoss Link CC Installation Manual

Installation Guide
4.8.

Adding room devices

A room device regulates temperature in the room where it is installed. All room
devices must be configured, according to the previous installation plan, to
ensure the signal path.
Configure Room
1
Room devices
Room Devices
4
The configuration is valid
18 06/2013
Danfoss Link™ CC
Room Devices
2
Add a device
?
Press
?
VISGL702
Add Room Device
3
Begin Registration
?
Note! Danfoss Link™ CC
automatically selects
the regulation principle
according to the types
of devices in the room.
To change regulation
principle, see 5.2 Chang-
ing parameters for Heat
Regulations.
Danfoss Heating Solutions
?