Mounting Mains Powered Devices - Danfoss Link CC Installation Manual

Installation Guide
4.4.

Mounting mains powered devices

Power-up all mains powered devices first, and any repeater units that might be
needed.
Note!
• If Danfoss Link™ HC is used, connect all actuators (TWA), before mains powering
the unit.
• ON/OFF relays are only visible in the end-user menu.
1 st
2 nd
Danfoss Heating Solutions
Danfoss Link™ CC
• Pair devices to Danfoss Link™ CC.
• Start with the device closest to the Danfoss
Link™ CC, and move outwards.
VISGL702 06/2013 15