Advertisement

User Guide
Danfoss Link
A central controller for your entire
house
DANFOSS HEATING SOLUTIONS

Advertisement

Table of Contents
loading

Summary of Contents for Danfoss Link

  • Page 1 User Guide Danfoss Link A central controller for your entire house DANFOSS HEATING SOLUTIONS...
  • Page 2 General system information Danfoss Link Congratulation on the purchase of your new Danfoss Link system In this user guide, we will explain what the Danfoss Link system can do and provide you with good advice and instructions for finding the settings that fit your exact needs.
  • Page 3 Danfoss Link™ CC panel to communi- cate.” How the user interface works The Danfoss Link system is operated via a user- friendly touchscreen. One common characteristic of the user inter- face is that you are always made aware where...
  • Page 4 Please note: If you have a Danfoss Link™ RS in combination If you have two thermostats You can set the temperature with a living connect® thermostat in the same room, in the same room, they will locally using the room sensor.
  • Page 5 General system information Danfoss Link I want to save energy Danfoss Link makes saving energy easy with- If you have radiator heating, you can experi- out having to compromise in terms of comfort. ment with significant temperature reductions (e.g. from 21 ˚C to 17 ˚C) in Away/Asleep mode.
  • Page 6 General system information Danfoss Link The At Home period is activated at the times of day when you are at home. The Away/Asleep period can be activated e.g. overnight, when most people prefer slightly cooler temperatures. Scheduling examples Set the period start/...
  • Page 7 At Home again. What happens when I change a local setting in a room? Does the Danfoss Link™ CC remember the new setting? If you are not using the weekly schedule, the If you are running the weekly schedules and...
  • Page 8 It is during this first week that the Danfoss Link gin a reheating cycle as well as how to account system learns how quickly the different rooms for seasonal temperature differences.
  • Page 9 Does the Danfoss Link system have a tamper-proof lock? Heat stop button Yes. It is possible to use a tamper-proof lock for the individual room units.
  • Page 10 Please note: Danfoss recommends the use of non- rechargeable, alkaline batteries (2 x AA per room unit), for which you can expect an average battery lifetime of 2 years.
  • Page 11 If a living connect® radiator thermostat loses its connection to the Danfoss Link™ CC, it will continue running at the last known set point. The Danfoss Link™ CC operating panel will is- sue an alarm if the room unit has not respond- ed within 90 minutes.
  • Page 12 General system information Danfoss Link That’s how the main system works - what about my sub-systems? Danfoss Link can control several sub-systems, and not two solutions are exactly alike. In the pages that follow, we will describe the unique Ventilation...
  • Page 13 General system information Danfoss Link Connecting your Danfoss Link™ CC for smartphone/ tablet control Your Danfoss Link™ CC can be paired to your smartphone or tablet for more convienence with the Danfoss Link™ App. 21. mar 09:46 Danfoss Link™ App. allows you to communi- cate remotely with your Danfoss Link CC.
  • Page 14 Third Party Components. ment”) is entered into between Danfoss A/S or its Affiliates (each of which is referred to as “Danfoss”) and you as an end 6. Disclaimer of Warranty user (“You” or “User”). In this Agreement “Affiliate” shall mean This License is provided on an “as is”...
  • Page 15 Alarm: see Danfoss Link™ CC operated (either because you have installed a panel for more information Danfoss Link™ RS, or because you have activated the child lock via the Danfoss Link™ CC panel) Multi-function key (used by installer) Danfoss Heating Solutions...
  • Page 16 22 °C room you actually use. 21.5 °C Alternatively, you can install a Danfoss Link™ RS in the room - in the area(s) you actually use - which will assume control of the temperature 21 °C...
  • Page 17 5 minutes by opening windows in opposite ends of the house. If you have a Danfoss Air ventilation system, then there is of course no need to open your windows.
  • Page 18 Hydronic Floor Heating Danfoss One® Danfoss Link™ HC/RS floor heating system Your floor heating system consists of three main components: - Manifolds (typically located in a utility cabinet) distribute heat to the individual rooms and back. - The master controller turns the heat on and off at the individual valves feeding the rooms.
  • Page 19 Temperature up Shown during network test 21,5 Measured room temperature Room sensor locked Temperature down Danfoss Link™ RS LED 1 lights up LED 2 does not light up Danfoss Link™ HC Manifold Heating circuit 1: on Heating circuit 2: off Danfoss Heating Solutions VÅSUB102...
  • Page 20 Temp. reduction in temperature you risk the heat pump hav- at 11 p.m. ing to activate its supplementary heat source (electric heating element) when reheating be- gins. This will have a negative impact on your energy consumption. Danfoss Heating Solutions VÅSUB102...
  • Page 21 See the front of this user guide: Does the Danfoss One® system have a tamper-proof lock? If you have a Danfoss Air ventilation system, it is of course not necessary to open the windows. Danfoss Heating Solutions...
  • Page 22 1. As part of a room heating solution based on an electric heat source (electric floor heating or an electric radiator). In this case, the system also has a Danfoss Link™ RS installed, which controls the room tempera- ture via the heat source/relay.
  • Page 23 Wireless devices Danfoss One® Danfoss Link™ HR and Danfoss Link™ PR wireless relay units Your wireless system includes one or more wireless relays. The wireless relay can be used in two ways: 1. In order to implement timer control of e.g.
  • Page 24 2 and the unit is associated with a room as its heat source, Start equipped with a Danfoss Link™ RS. All weekly scheduling and temperature set- House control tings can be entered as described in the first part of this guide.
  • Page 25 Danfoss CF-RU Repeater Unit Your wireless system includes a repeater unit (signal amplifier). 21,0 The repeater unit is used to link two wireless devices which have difficulty communicating with each another. There are various reasons why a wireless system may require a repeater unit. For one thing, the distance between the devices may be too great.
  • Page 26 Reduce the room tempera- room device too high. ture setting range in the room, or deactivate the local setting option. Also refer to section: Does the Danfoss One® system have a tamper- proof lock? Strong solar gains in low- Solar screening / blinds.
  • Page 27 ). activate heating in the room. Also refer to section: Does the Danfoss One® system have a tamper-proof lock? The battery life is less than 2 Rechargeable batteries are Switch to non-rechargeable years being used.
  • Page 28 This can result in insufficient when the system needs it. heating output when the Danfoss recommends using heating system needs it. only the Danfoss Link CC to ™ set the temperature reduc- tion periods. The decreased temperature is...
  • Page 29 Danfoss A/S Indoor Climate Solutions Ulvehavevej 61 7100 Vejle Denmark Phone: +45 7488 8500 Fax: +45 7488 8501 Email: heating.solutions@danfoss.com www.heating.danfoss.com VÅIOG102...

Table of Contents