Installation - Danfoss Link CC Installation Manual

Installation Guide

4. Installation

Danfoss Link™ CC can be installed
with either a PSU (in-wall power
supply) or a NSU (net power sup-
ply).
Installing Danfoss Link™ CC with In-Wall PSU
• Hold the PSU over the wall box and mark up the 4
screw holes.
Make sure the top is level.
• Drill holes and put fitting plugs in.
• Connect the PSU according to the connection diagram
on the back side.
• Mount the PSU with the 4 screws.
12 06/2013
Danfoss Link™ CC
VISGL702
!
Do not Avoid direct sun-
install in light to Danfoss
bathrooms
Install in
height of
Link™ CC 140-170 cm
UP
PSU
Danfoss Heating Solutions