Taking Measurements Using Watchbp Home S - Microlife WatchBP Home S Instruction Manual

Taking measurements using WatchBP Home S

1) Before the measurement – Avoid taking
measurements directly after eating, drinking
or smoking. Prepare a chair and table for the
measurement. The chair should have a vertical back-
rest and the table should allow for your upper arm to
rest at the same height as your heart. Sit down and
relax for at least 5 minutes before the measurement.
2) Applying the cuff – Remove all clothing covering or
constricting the arm to be measured. Fit the cuff closely
around the arm, but not too tight, and be placed 2~3cm
above the elbow with the tube on the inside of the arm.
7
Support the arm at the same height as the heart
during measurement.
SYS
mmHg
3) Start the measurement – Press the ON/OFF
DIA
Button to start measurement. The cuff will inflate mmHg
Pulse
automatically.
/min
*Prior to pressing the ON/OFF button, ensure that the button
lock switch is at unlock. Switch to lock to avoid accidental
activation of the buttons after use.