Hantek DSO3062L User Manual page 84

DSO3062L/DSO3062AL
Digital Oscilloscope
Synchronized output
If you generate a waveform by software, there is a synchronized signal output from "SYNC"
terminal. The signal is square waveform, the frequency of which is equal to the waveform
you generated. For example, if you generated an 1 KHz, sine waveform, you will also
generate an 1 KHz, square waveform simultaneously. The software setting is following
figure.
The waveform on CH1 is the sine waveform you generated from the "OUTPUT" terminal,
and that on CH2 is the synchronized signal from "SYNC OUT" terminal.
USER'S MANUAL 82