Hantek DSO3062L User Manual page 40

Video Trigger:
Mode: Select the trigger mode.
Sweep:
Source: Set the Trigger Channel to CH1,CH2.
Trigger Sync:
Trigger Standard:
Options Settings
Video
Auto,
Sweep Normal
Single
CH1
Source CH2
EXT
All Lines
Line Number
Sync Odd Field
Even Field
All Fields
NTSC
Standard
PAL/SECAM
Set ALT System
Mode: Select the trigger mode.
Trigger Channel: Set the Trigger Channel to CH1,CH2.
Trigger Type: Set the Trigger Type to Edge or Pulse.
USER'S MANUAL
Comments
With Video highlighted, an NTSC, PAL or SECAM
standard video signal will be triggered. The trigger
coupling is preset to AC.
Auto: Acquire waveform even no trigger occurred
Normal: Acquire waveform when trigger occurred
Single: Acquire waveform when trigger occurred then
stop.
Select the input source as the trigger signal. Ext use the
signal applied to the EXT TRIG connector as the source.
Choose a proper video sync. When selecting Line
Number for the Sync option, you may use the User
Select knob to specify a line number.
Choose a video standard for sync and line number
count.
DSO3062L/DSO3062AL
Digital Oscilloscope
38