Hantek DSO3062L User Manual page 72

DSO3062L/DSO3062AL
Digital Oscilloscope
2. Click "Cursor->Type", select Horizontal.
3. Push left mouse button, and the Horizontal lines appear.
4. Drag the mouse button to the point you want to measure.
5. Release the left mouse button, the voltage difference will be shown at the status bar.
Measure the Amplitude:
Read the details showing in the status bar.
Trace the Amplitude of a fixed position on X-axis in a Waveform
Do these steps:
1. Click "Cursor->Source", select CH1 (select CH2 if you want trace CH2).
2. Click "Cursor->Type", select Trace.
3. Click the cursor at the position that you want traced of the wave in the waveform
window.
USER'S MANUAL 70