Hantek DSO3062L User Manual page 79

The Square waveform window as the following:
Generate the AM/FM waveform
To output an AM/FM Wave, please do the following Steps:
1. Press the check box "On/Off" to open the wave output function.
2. Select the Wave Type "AM/FM".
3. Set the Wave Parameters:
Frequency: Set the output wave frequency.
Amplitude: Set the output wave amplitude.
Y Offset: Set the output wave vertical level offset.
Phase: Set the output wave phase.
High Frequency: Set the output wave Hight Frequency.
Depth: Set the output wave Depth.
Max Frequency: Set the output wave Max Frequency.
FM: Change the output wave "AM" into "FM".
The AM/FM waveform window as following:
USER'S MANUAL
DSO3062L/DSO3062AL
Digital Oscilloscope
77