Hantek DSO3062L User Manual page 81

The Trapezia waveform window as the following:
Generate the Gause waveform
To output a Gause Wave, please do the following steps:
1. Press the check box "On/Off" to open the wave output function.
2. Select the Wave Type "Gause".
3. Set the Wave Paramters:
Amplitude: Set the output wave amplitude.
The Gause waveform window as the following:
Generate the Arb. waveform
To output an Arbitrary Waveform, please do the following steps:
1. Press the check box "On/Off" to open the wave output function.
2. Select the Wave Type "Arb.".
3. Set the Wave Parameters:
Frequency: Set the output wave frequency.
4. Set the output wave.
The Arb. waveform window as the following:
USER'S MANUAL
DSO3062L/DSO3062AL
Digital Oscilloscope
79