Hantek DSO3062L User Manual page 20

10.Marker shows Edge trigger level.
11.Displays the main time base setting.
12.Displays the LA channel setting on-off status.
13.Displays the CH2 information
Readouts show the coupling of the channels.
Readouts show the vertical scale factors of the channels.
A "B" icon indicates that the channel is bandwidth limited
14.Displays the CH1 information
Readouts show the coupling of the channels.
Readouts show the vertical scale factors of the channels.
A "B" icon indicates that the channel is bandwidth limited
15.The markers show the CH2 reference points of the displayed waveforms. If there
is no marker, the channel is not displayed.
16. The markers show the CH1reference points of the displayed waveforms. If there
is no marker, the channel is not displayed.
17. A window that shows the display waveform in buffer position.
18. Marker shows horizontal trigger position.
19. Trigger status indicates the following:
AUTO: The oscilloscope is in auto mode and is acquiring waveforms in the absence of
triggers.
Trig'D: The oscilloscope has seen a trigger and is acquiring the post trigger data.
WAIT: All pretrigger data has been acquired and the oscilloscope is ready to accept a
trigger.
STOP: The oscilloscope has stopped acquiring waveform data.
RUN: The oscilloscope is running.
PLAY: The oscilloscope is displaying the record waveforms.
USER'S MANUAL
DSO3062L/DSO3062AL
Digital Oscilloscope
18