Hantek DSO3062L User Manual page 42

DSO3062L/DSO3062AL
Digital Oscilloscope
2.Set Bus Trigger
The Bus mode includes three trigger modes:
Trigger value: Trigger at the appearance of a specified value on the selected bus.
Duration: Trigger at x time after the appearance of a specified value.
Edge: Trigger at the appearance of a specified value on the selected bus and rising, falling,
or rising edge of the selected signal.
3.Setup Advanced Trigger
If the basic trigger can't meet your requirement, you need the advanced trigger setup.
T
here are four parts in the conditions: Data, Duration, Edge and Relative trigger.
USER'S MANUAL 40