Hantek DSO3062L User Manual page 47

DSO3062L/DSO3062AL
Digital Oscilloscope
The Pass/Fail function monitors changes of signals and outputs pass or fail signals by
comparing the input signal with the pre-created mask.
Control Setting
Source: Select the Pass/Fail channel
Output: Select the Pass/Fail output condition.
Stop When Output: If it was checked, the Pass/Fail will stop when output.
Mask Setting
V
ertical: Set the vertical limit range
Horizontal: Set the horizontal limit range
"Create" button: Click this button to create Pass/Fail area according to the mask
"Save" button: Click this button to save the setups to file
"Load" button: Click this button to load the saved setups file
USER'S MANUAL 45