Hantek DSO3062L User Manual page 82

Generate the Exponent waveform
To output an Exponent Waveform, please do the following steps:
1. Press the check box "On/Off" to open the wave output function.
2. Select the Wave Type "Exponent".
3. Set the Wave Parameters:
Frequency: Set the output wave frequency.
Amplitude: Set the output wave amplitude.
Y Offset: Set the output wave vertical level offset.
Phase: Set the output wave phase.
Tao: Set the ouput wave Tao param.
Rise: Set the output wave slope.
The Exponent waveform window as the following
Generate the White noise waveform
To Generate a White noise Wave, please do the following steps:
1. Press the check box "On/Off" to open the wave output function.
2. Select the Wave Type "White".
USER'S MANUAL
DSO3062L/DSO3062AL
Digital Oscilloscope
80