Strong SRT 8205 User Manual page 17

When you select a speci c function, its name will be shifted up relative to the names of other
functions, which indicates its activity.
To cancel the selected function, press the corresponding button again or press EXIT. The name will
return to the names of other functions again.
NOTE:
Select the channel of choice with . Press OK to view the selected channel in the preview box.
7.1.1.1 Adding channels to favourite lists
Channels from the TV Channel List can be added to up to 8 di erent favourite groups.
Press FAV. The FAV sign on the top of the screen will move up.
Use  to select a channel you wish to add to a favourite group.
When the highlight is on the channel of your choice, press OK. A list with all available favourite lists
will now pop up.
Use  to select the favourite list you wish to add the channel to and press OK.
Press EXIT to nalize the process.
Favourite channels will be marked with a v symbol.
When all changes have been made, press EXIT twice. A con rmation banner will pop up. Select Yes to
save the changes or No to discard.
7.1.1.2 Locking channels
Locked channels can only be watched after entering the PIN code.
DEFAULT PIN: 1234
To lock or unlock a channel, press RED.
Use  to select a channel and press OK to lock or unlock it. You are asked to input the PIN code.
Locked channels will be marked with the symbol.
Locking/unlocking multiple channels in one session is possible.
When all changes have been made, press EXIT twice. A con rmation banner will pop up. Select Yes to
save the changes or No to discard.
7.1.1.3 Skipping channels
Channels marked with 9 will be skipped when zapping channels with the  buttons. These
channels will be still available from the channel list.
To mark channels for skipping, press GREEN while in TV Channel List.
Use  to select a channel and press OK to mark or unmark it for skipping.
Channels set for skipping will be marked with the 9 symbol.
When all changes have been made, press EXIT twice. A con rmation banner will pop up. Select Yes to
save the changes or No to discard.
7.1.1.4 Moving channels
To enable the Move function, press YELLOW.
Use  to select a channel and press OK to select it. Now you can move the selected channel up or
down inside the channel list by using .
If previously Favourite channel lists were created, use   buttons if
necessary to change channel list.
13