Step-By-Step Installation - Matrox Extio F2208 User Manual

Step-by-step installation

Open your computer and
1
remove your existing graphics
card
If a graphics card isn't already installed in
your computer, skip to
If a graphics card is already installed in your
computer:
Using
a
(Windows® 7/Vista®) or
Programs
Windows
computer for the changes to take effect.
After your computer restarts, you're prompted to install drivers for the new graphics
hardware detected. Click
Turn off your computer and all peripherals such as your monitor or printer.
b
Open the computer and remove your existing graphics card (if any).
c
Note:
disabled. For more information, see your system manual.
Choose an expansion slot
2
Most computers have different types of
expansion slots. Your interface card is a
PCIe® ×1 card. It's compatible with all PCIe
slots. To ensure maximum system
compatibility, we recommend you use a
PCIe ×16 slot. Your system manual should
identify the location of each type of
expansion slot in your computer.
step 2.
Programs and Features
Add/Remove
(Windows® XP) in the
, remove any currently installed display drivers. Restart your
Control Panel
Cancel
If graphics hardware is built into the motherboard of your computer, make sure it's
.
(Back of computer)
Matrox Extio Series – User Guide
(×16)
(×8)
(×4)
(×1)
(32-bit)
(64-bit)
9