Air Intake Installation - Hood Versions (Includes External Dampers) - DaVinci Category 2 Owner's Manual

Air intake Installation – Hood Versions (includes external dampers)
Part Numbers
6" Hood w External Damper 98900093
8" Hood w External Damper 98900094
6" Hood only
Installation Diagram (intake with damper)
Installation

WARNING:
DO NOT CONNECT THE INTAKE DAMPER WIRES TOGETHER (This will short the system).

Locate the intake damper wires and make sure they are accessible before proceeding.

NOTE: In the pictured example, we have crimped the intake damper. You may crimp this or use
the included slider plate or connector to attach your flex duct.

DO NOT SCREW INTO THE TOP OF THE INTAKE DAMPER – THIS MAY CAUSE DAMAGE
TO THE INTAKE DAMPER ACTUATOR.
Slide the intake hood into the included flashing and secure.
Secure theduct to the hood. Use 2 or 3 screws and tape to attach and seal the duct.
© Travis Industries
Installation
(for qualified installers only)
6/19/18 - 1418
71
DaVinci-Cat2+