Category 3 Dimensions - Left Side Corner Configuration - DaVinci Category 2 Owner's Manual

18
Category 3 Dimensions – Left Side Corner Configuration
5.75"
(147mm)
19.75"
502mm
NOTE: The master module is always on the end that has a steel end.
(a) Air intake – See table below for quantity - Location determined by fireplace length (see "Air Intake Duct Location" on page 69).
(b) Vent Collar – Uses 10" or 8" Diameter B-Vent (determined by power vent type). Centered on module.
(c) Gas Control Valve – Located to the front of the master module (front of fireplace is determined by gas control valve location).
(d) Electrical Junction Box – On master module (location determined at time of order – can be relocated), includes 120v input,
exhaust vent power/harness, on-off LED harness.
(e) Gas Inlet – On master module (NOTE: gas inlet is always located along the front edge, even if master module is to the left).
(f) Vent Collar Distance to Front/Back – Approx. 4.375" (112mm) for 10" B-Vent, 5.375" (137mm) for 8" B-Vent
Horizontal Dimensions & Specifications
Version Width (x)
138" Left Side 139" (3531mm)
150" Left Side 151" (3836mm)
162" Left Side 163" (4141mm)
174" Left Side 175" (4445mm)
186" Left Side 187" (4750mm)
* Primary vent is centered on the fireplace. Power vent configuration is determined at the time of order.
© Travis Industries
Features and Specifications
Secondary
Module
Vent Loc. (y)
*
*
*
*
*
10/10/18 - 1418
a
y
b
f
Secondary
Module
Version
Length
x
Air Intakes Power Vent
6
6
6
6
6
18.125"
(461mm)
Master
12" (305mm)
20" (508mm)
Module
30" (762mm)
36" (915mm)
58" (1474mm)
d
12.5"
318mm
e
c
BTUs Min. Weight
* 159,500 2150 lbs. 958Kg
* 174,000 2300 lbs. 1024Kg
* 188,500 2450 lbs. 1091Kg
* 203,000 2600 lbs. 1158Kg
* 217,500 2750 lbs. 1225Kg
12" Glass
42.625" (1083mm)
20" Glass
50.625" (1286mm)
30" Glass
60.625"
(1540mm)
36" Glass
66.625 (1693mm)
58" Glass
88.625" (2252mm)
DaVinci-Cat2+