Air Intake Installation - Hood Versions (Includes External Dampers); Part Numbers; Installation Diagram (Intake With Damper); Installation - DaVinci Maestro Collection Square Owner's Manual

Air intake Installation – Hood Versions (includes external dampers)

Part Numbers

8" Hood w Damper 98900094

Installation Diagram (intake with damper)

Installation


WARNING:
DO NOT CONNECT THE INTAKE DAMPER WIRES TOGETHER (This will short the system).

Locate the intake damper wires and make sure they are accessible before proceeding.

NOTE: In the pictured example, we have crimped the intake damper. You may crimp this or use
the included slider plate or connector to attach your flex duct.

DO NOT SCREW INTO THE TOP OF THE INTAKE DAMPER – THIS MAY CAUSE DAMAGE
TO THE INTAKE DAMPER ACTUATOR.
Slide the intake hood into the included flashing and secure.
Secure theduct to the hood. Use 2 or 3 screws and tape to attach and seal the duct.
© Travis Industries
Installation
(for qualified installers only)
9/25/17-1468
35
Maestro