Category 2 Dimensions - Full Bay Configuration - DaVinci Category 2 Owner's Manual

10
Category 2 Dimensions – Full Bay Configuration
12" Glass
42.625" (1083mm)
20" Glass
18.125"
50.625" (1286mm)
(461mm)
30" Glass
60.625"
(1540mm)
12" (305mm)
20" (508mm)
30" (762mm)
36" Glass
36" (915mm)
58" (1474mm)
66.625 (1693mm)
58" Glass
88.625" (2252mm)
12.5"
318mm
(a) Air intake – See table below for quantity - Location determined by fireplace length (see "Air Intake Duct Location" on page 69).
(b) Vent Collar – Uses 10" or 8" Diameter B-Vent (determined by power vent type). Centered on module.
(c) Gas Control Valve – Located to the front of the master module (front of fireplace is determined by gas control valve location).
(d) Electrical Junction Box – On master module (location determined at time of order – can be relocated), includes 120v input,
exhaust vent power/harness, on-off LED harness.
(e) Gas Inlet – On master module (NOTE: gas inlet is always located along the front edge, even if master module is to the left).
(f) Vent Collar Distance to Front/Back – Approx. 4.375" (112mm) for 10" B-Vent, 5.375" (137mm) for 8" B-Vent
Horizontal Dimensions & Specifications
Version Width (x)
84" Full Bay 84" (2134mm)
96" Full Bay 96" (2439mm)
108" Full Bay 108" (2744mm)
120" Full Bay 120" (3048mm)
132" Full Bay 132" (3353mm)
© Travis Industries
Features and Specifications
Secondary
Module
Version
Length
Vent Loc. (y)
24" (610mm)
30" (762mm)
30" (762mm)
36" (915mm)
36" (915mm)
10/10/18 - 1418
a
f
Master
Module
c
x
Air Intakes Power Vent
2 Low Volume
3 High Volume
3 High Volume
4 High Volume
4 High Volume
a
y
b
5.75"
(147mm)
d
e
19.75"
502mm
BTUs Min. Weight
87,000 1100 lbs. 490Kg
101,500 1200 lbs. 534 Kg
116,000 1350 lbs. 601 Kg
130,500 1800 lbs. 802 Kg
145,000 2000 lbs. 891 Kg
DaVinci-Cat2+