Typical Framing Dims - Right-Sided Corner - DaVinci Category 2 Owner's Manual

46
Typical Framing Dims – Right-Sided Corner
Recessing the Back Edge of the Fireplace (Optional)
Installers may wish to recess the back of the fireplace to allow for a more shallow installation, placing the side
glass next to the side wall(s). If you decide to recess the back of the fireplace, make sure to accommodate
the framing and facing dimensions. The back edge of the glass extends to a location 5.75" (147mm) from the
back of the fireplace (see dimensions page for details). Framing for this type of installation may protrude
forward from the back wall of the opening a maximum of 5.25" (134mm) when using ½" (13mm) drywall.
Consult the dimensions page and plan your installation prior to framing the opening.
Version
78" Right Side
90" Right Side
102" Right Side
114" Right Side
126" Right Side
138" Right Side
150" Right Side
162" Right Side
174" Right Side
186" Right Side
© Travis Industries
Installation
3" (77mm) Maximum for vent clearance. Do not place
vertical framing directly in the center above the fireplace - it
will infringe upon the vent clearance requirements.
19.75"
502mm
x
Width (x) Height (y)
12" Glass
79.5" (2020mm)
91.5" (2325mm)
103.5" (2629mm)
115.5" (2934mm)
127.5" (3239mm)
50.625"
139.5" (3544mm) (1286mm)
151.5" (3849mm)
163.5" (4153mm)
175.5" (4458mm)
187.5" (4763mm)
(for qualified installers only)
y
Max. 5.25"
134mm
Height (y)
20" Glass
58.625"
(1490mm)
6/19/18 - 1418
Height (y) Height (y)
30" Glass 36" Glass
68.625" 74.625"
(1744mm) (1896mm)
Height (y)
58" Glass
96.625"
(2455mm)
DaVinci-Cat2+