Secure The Fireplace To The Alignment Track - DaVinci Category 2 Owner's Manual

Secure the Fireplace to the Alignment Track

Verify the Fireplace is Level Before Proceeding
Use a level to verify the fireplace is level (check several spots across the entire length). Use
shims (or washers/spacers) under the fireplace, if necessary, to make sure the fireplace is
level.
The alignment track as hoirzontal holes that allow for the fireplace to be secured to the track. Make sure
the fireplace is correctly positioneed left to right, then use #8 zip screws to secure the fireplace to the
track.
© Travis Industries
Installation
(for qualified installers only)
6/19/18 - 1418
35
DaVinci-Cat2+