Order Of Installation - DaVinci 72 SS Timber Installation Instructions Manual

Tools Required

Glass lifting suction cup set (sku# - 94400914)
Installation Notes
WARNINGS:

Make sure the gas control valve is OFF and the heater is cool prior to conducting service.

Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved
with this appliance may result in property damage or personal injury.
HINTS:

The fireplace should be in place, with the gas line and vent attached and the firebacks installed.

ORDER OF INSTALLATION:


Remove the burner

Remove the log grate(s).

Dress the media tray with Ember-Glo™ glass.

Reinstall the log grate(s)

Reinstall burner

Place the logs as shown.

Place ember chunks on the Ember-Glo glass.

Reinstall the inner glass pane

Reinstall the inner fireback filler pieces (removed to install firebacks).

Dress the outer media tray with Ember-Glo glass

Place ember chunks on the Ember-Glo glass.

Reinstall the outer glass pane

Reinstall the outer fireback filler pieces (removed to install firebacks).

Reinstall the barrier screen (removed to install firebacks).
Page 3 of 24
DaVinci 72" SS Timber Fire Log Set
Installation Instructions
17602248 — 7/25/22 © Travis Industries, Inc.