SRAM Rock Shox Yari 2019 Service Manual page 53

Clamp the rebound seal head back into the vise.
5
Wrap the rubber strap from a strap wrench around the cartridge tube
above the rebound damper seal head.
Unthread and remove the tube from the seal head.
Remove the seal head and rebound damper from the vise.
6
Remove the seal head from the rebound damper shaft.
Discard the seal head.
Spray RockShox® Suspension Cleaner or isopropyl alcohol into the
7
cartridge tube and clean the inside of the tube with a clean shop towel
and a thin dowel (≤16 mm diameter).
Inspect the inside of the cartridge tube for scratches.
Scratches on the inside surface of the tube can cause oil to leak. If an
internal scratch is visible, the cartridge tube may need to be replaced.
NOTI CE
Strap Wrench
53
Damper Service