SRAM Rock Shox Yari 2019 Service Manual page 56

Clamp the seal head into the vise.
3
Pinch the glide ring while installing the cartridge tube over the piston
and glide ring.
Thread the tube into the seal head hand tight.
Pull the damper shaft to full extension.
Secure a shop towel around the cartridge tube to absorb oil.
4
Pour 57 mL RockShox® 3wt suspension oil into the tube.
Thread a bottom bolt into the rebound damper shaft.
5
Slowly cycle the rebound damper in and out half way to remove air
bubbles trapped under the rebound damper piston.
Stop when no bubbles are visible in the oil.
3wt 57 mL
56
Damper Assembly