SRAM Rock Shox Yari 2019 Service Manual page 69

L o w e r L e g A s s e m b l y
5 0 / 2 0 0 H o u r S e r v i c e
Clean the upper tubes.
1
Apply grease to the inner surfaces of the dust wiper seals.
2
Install the lower leg assembly onto the upper tubes and slide it just
3
enough to engage the upper bushings with the upper tubes.
Make sure both wiper seals slide onto the tubes without folding the
outer lip of either seal.
The inside bottom of the lower leg should not contact the spring or
damper shafts. A gap between the shaft ends and the lower leg bolt
holes should be visible.
Position the fork at an angle with the bolt holes oriented upward.
4
Inject RockShox® 0w-30 suspension oil into each lower leg through the
bottom bolt holes.
Do not exceed the recommended oil volume per leg as this can
damage the fork.
L o w e r L e g I n s t a l l a t i o n
NOTI CE
NOTI CE
0w-30 RockShox Bleed Syringe 10 mL
69
Lower Leg Assembly