SRAM Rock Shox Yari 2019 Service Manual page 48

Install the remote spool onto the hex adjuster with the spool cable set
screw oriented within the 87° range zone.
Install the knob seal.
Install the low speed adjuster knob onto the hex adjuster. Install and
tighten the knob retaining screw.
RC R: Install the cable stop collar with the housing guide in the
6 o'clock forward position, angled ≈20° degrees from center.
Install the remote spool onto the hex adjuster with the spool cable set
screw oriented within the 87° range zone.
Tighten the spool retaining screw.
2 mm
RC R
2 mm
1.2 N·m (10 in-lb)
87°
20°
1.2 N·m (10 in-lb)
48
Damper Installation