SRAM Rock Shox Yari 2019 Service Manual page 21

Stabilize the lower leg on a bench top. Hold the lower leg steady and
7
press the wiper seal into the lower leg until the top of the seal is flush
with the top of the lower leg.
Optional: If the Abbey Bike Tools™ installation tool is used, use a mallet
to seat the seal.
Repeat on the other side.
Only press the wiper seal into the lower leg until it is flush with the top
surface of the lower leg. Pressing the wiper seal below the top surface
of the lower leg will compress the foam ring.
Install the outer wire springs.
8
NOTI CE
21
Lower Leg Seal Service