SRAM Rock Shox Yari 2019 Service Manual page 20

Soak the new foam rings in RockShox® suspension oil.
4
Install the new foam rings into the lower leg.
Remove the outer wire spring from each new dust wiper seal and set
5
them aside.
Insert the narrow end of a new wiper seal into the recessed end of the
6
35 mm Dust Seal Installation tool.
If the RockShox® x Abbey Bike Tools™ installation tool is used, confirm
the 35 mm installation puck is tightened hand tight on the installation
tool handle to avoid damage to the installation puck during use.
NOTI CE
0w-30
Abbey Bike Tools Dust Seal Installation Tool
RockShox® 35 mm Dust Seal Installation Tool
20
Lower Leg Seal Service