2 0 0 H o u r S e r v i c e
Remove the o-ring from the top cap. Clean the top cap threads and
1
o-ring groove. Apply grease to a new o-ring and install it.
Clamp the cartridge tube wrench flats in a vise with flat soft jaw inserts,
2
with the rebound damper oriented upwards.
Wrap a rag around the cartridge tube to absorb oil.
Unthread and slowly remove the rebound damper seal head assembly
3
from the cartridge tube.
Remove the seal head from the rebound damper shaft and discard it.
4
D a m p e r S e r v i c e
23 mm
35
Damper Service