Test Lockout Or Compression - SRAM Rock Shox Yari 2019 Service Manual

T e s t L o c k o u t o r C o m p r e s s i o n
RC2 / RCT3 / RCT R: Rotate the compression cam clockwise, until it
1
stops, to the locked out or firm position.
RCT R / RC R: Use a 13 mm socket to hold the cam locked out, full
clockwise until it stops, while compressing the damper.
Push down on the damper assembly to test the bleed.
RCT3 / RCT R: The rebound damper shaft should not move more than
2 mm. If the shaft moves more than 2 mm while locked out, repeat the
bleed process.
RC2 / RC / RC R: Consistent resistance should be felt with no gaps
in movement. If gaps are felt during compression, repeat the bleed
process.
If the bleed was successful, rotate the compression cam counter-
clockwise until it stops, to the unlocked position.
RC2 / RCT3 / RC
RC2 / RCT3 / RC

Test Lockout or Compression

13 mm RCT R / RC R
13 mm RCT R / RC R
44