SRAM Rock Shox Yari 2019 Service Manual page 47

RC: Install the compression adjuster knob onto the top cap with the tab
in the forward, unlocked, position.
Install and tighten the retaining screw.
RCT R: Install the cable stop collar with the housing guide in the
3b
6 o'clock forward position, angled ≈20° degrees from center.
Push the low speed adjuster knob spring retainer (A) in and push the
knob out of the remote spool.
Remove the top cap seal.
Clean each part.
RC
2 mm 1.2 N·m (10 in-lb)
RCT R
A
87°
20°
47
Damper Installation