Table of Contents
Advertisement
Breathing maneuvers for all available tests
8.4
About the OSHA test
8.5
About the SSA test
Operator's Manual V1.1 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
The OSHA test is intended for occupational testing and meets certain
standardization requirements. The OSHA test is only available with US
regional settings.
From the test menu in EasyOne Connect, choose the OSHA test.
On EasyOne Air, choose the OSHA test from the more menu.
The patient performs the same breathing maneuver as for the FVC test.
Reports meet the requirements of the following institutions and standards:
• Occupational Safety and Health Administration (OSHA)
• National Institute for Occupational Safety and Health (NIOSH)
• Cotton Dust standard (29 CFR: 1910.1043 Appendix D)
• Predicted values for adults according to Knudson (1976)
The default configuration for predicted values for adults is NHANES III. To use
predicted values for adults according to Knudson (1976), you need to change
the configuration in the following menu:
>
>
> Predicted set 1
According to these requirements, the reports contain the following
information:
• The best three tests and volume-time curves are saved and printed.
• The curves are printed in large, in validation size.
• There is no clinical interpretation displayed or printed.
Performing spirometry, 51
Performing the breathing maneuver for the FVC test, 75
Application Note Reference Predicted Normal Values
Application Notes for further information, 3
The SSA test is intended to test for social security disabilities. The SSA test is
only available with US regional settings.
The patient performs the same breathing maneuver as for the FVC test. Merely
the quality grades for the SSA are different from the quality grades for the FVC
test.
Performing spirometry, 51
Performing the breathing maneuver for the FVC test, 75
Quality grades for the SSA test, 74
79
77/144
Advertisement
Table of Contents
