Table of Contents
Advertisement
Working with patient data and reports
10.2.3
Merging two patient data records with EasyOne Connect
10.2.4
Deleting patient data from the database of EasyOne Connect
Operator's Manual V1.1 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
If, for example, two data records of the same patient were acquired with
different tests or if different spellings of a patient's name exist, you can
merge these two data records into one.
Prerequisite
The two data records must have an identical date of birth.
1 Choose Patients.
2 Select one of the two data records.
3 Drag and drop that data record onto the second data record by doing the
following:
a) Right-click the first data record and keep the mouse button pressed.
b) Move the data record across the screen onto the second data record.
c) While the first data record is above the second, release the mouse
button.
If the dates of birth of the two data records match, a confirmation
window is displayed.
If the dates of birth of the two data records do not match, a warning is
displayed. In this case, you cannot merge these two data records.
4 To finish, confirm the message.
1 Choose Patients.
2 Select a patient.
3 Choose Delete.
If user handling is not active, that is if you did not have to login to
EasyOne Connect, you are prompted for the default password. Proceed with
step 4.
If user handling is active, that is if you did have to login to
EasyOne Connect, you are not prompted for a password. A confirmation
window is displayed immediately. Proceed with step 5.
4 Enter the default user name / password.
The default user name / password is: admin / 8005
A confirmation window is displayed.
5 Choose Yes.
The patient and all corresponding tests are deleted from the database.
About user handling and the default password of EasyOne Connect, 105
92
87/144
Advertisement
Table of Contents
