Table of Contents
Advertisement
Connectivity and data exchange
6.2
About integration of EMR systems
6.2.1
About supported EMR standards
6.2.2
About possible workflows with your EMR system
Operator's Manual V1.1 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
For support with the configuration of an SQL-server-based database, contact
the ndd Servicing Department.
Application Note EasyConnect – Database Connection
Application Notes for further information, 3
Utilities > Configuration > General > Storage, 106
Contact information, 4
EasyOne Connect and EasyOne Pro/LAB can be interfaced with your EMR
system.
EMR systems are, for example, hospital information system (HIS) and other
information systems in the health sector that use the electronic medical
record to exchange patient data in a standardized format. EasyOne Connect
and EasyOne Pro/LAB have EMR plug-ins preinstalled:
• HL7 – Health Level 7 is an international EMR standard.
• GDT – Gerätedatentransfer is a German EMR standard.
• XML file exchange – With this plug-in, you can connect your EMR system
using a simple and configurable XML file exchange.
Operator's Manual of your EMR system
There are two general possibilities for working with your EMR system: the
order workflow and the direct-start workflow.
The order workflow
For the order workflow, EasyOne Connect or EasyOne Pro/LAB and your EMR
system are connected over the network and exchange so-called orders.
In an additional menu on the main menu, EasyOne Connect and
EasyOne Pro/LAB display the orders from your EMR system. With the order
workflow, you initiate a spirometry test in EasyOne Connect or on
EasyOne Pro/LAB.
You can also send test results to your EMR system manually even if these test
results have not been ordered from your EMR system.
50
45/144
Advertisement
Table of Contents
