Table of Contents
Advertisement
Cybersecurity
5.3
About periodical software updates and patches
5.4
About backups
5.5
Escalating in case of a security breach
Operator's Manual V1.1 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
For secure use, perform software updates regularly.
Contact your EasyOne dealer in order to receive regular notifications of
software updates, or visit the ndd website for information on updates.
Installing or updating the EasyOne Connect software on your PC, 25
Performing a firmware update with EasyOne Air, 101
Contact information, 4
Whether or not EasyOne Connect performs backups automatically depends on
whether a file-based database or an SQL-server-based database is used.
When using a file-based database
EasyOne Connect includes a separate backup storage that automatically
stores the current database. The backup is performed each time
EasyOne Connect is shut down.
In addition, the manufacturer recommends that you regularly backup the
database manually to a different storage device and that you store this
additional backup in a separate location.
When using an SQL-server-based database
In this case, no automatic backup is performed. It is the operating
institution's responsibility to perform backups of the SQL server regularly.
Utilities > Configuration > General > Storage, 106
In case a security breach has been detected in your institution, do the
following:
1 Immediately disconnect the PC that EasyOne Connect is installed on from
the network.
After you have disconnected the PC that EasyOne Connect is installed
on from the network, you can no longer access an SQL server, but you can
work temporarily with a file-based database that is stored locally on your
PC.
2 Follow all other necessary procedures for a security breach as specified by
your institution's IT department.
3 If you are uncertain whether EasyOne Air has been compromised, contact
the ndd Servicing Department.
43
41/144
Advertisement
Table of Contents
