Insecure Call Alert; Block Dialing For Outgoing Calls - Unify OpenScape CP600 User Manual

172
Service/Settings
$ User:
-
if nec.
$ Configuration
-
Existing connections
-

Insecure call alert

¦
Insecure call alert ¢
Q
Service/Settings
$ User:
-
if nec.
$ Configuration
-
Outgoing calls
-
Block dialing
¦
Block dialing
¢
Q
Insecure call alert
z
You can also configure this setting via the Web interface
@
If nec. Press Main Menu key.
Open using the Softkey
_
Open using the Softkey.
_
j
Enter and confirm the User password.
Open using the Softkey.
_
Open using the Softkey.
_
Activate with the Softkey Insecure call alert.
_
or
Deactivate with the Softkey Insecure call alert.
_
Save setting.
_

Block dialing for outgoing calls

If block dialing is displayed, when deleting a phone number, for example, all of
the characters available in the field are deleted at once. If block dialing is swit-
ched on, you can delete individual characters.
z
You can also configure this setting via the Web interface
@
If nec. Press Main Menu key.
Open using the Softkey
_
Open using the Softkey.
_
j
Enter and confirm the User password.
Open using the Softkey.
_
Open using the Softkey.
_
Activate with the Softkey Block dialing.
_
or
Deactivate with the Softkey Block dialing.
_
Save setting.
_
page 179.

page 179.
