Table of Contents
Advertisement
2
Basic Operation and Configuration
Sensor > Devices > IR > Zoom Slave
The Zoom Slave function is set from the IR web page. To slave the IR camera to the DLTV zoom select
the IR web page and scroll down to Zoom Slave.
When the IR camera zoom is slaved to the DLTV camera (Specific Camera), the cameras will only
zoom when the DLTV camera is the active camera.
Sensor > Devices > Pan & Tilt
Scroll down to select an action the camera will perform at startup (power cycle or server reset).
427-9030-01-12 Version 140
March 2018
Set to Yes
Select zoom mode
Select camera
controlling zoom
Scroll down
to Save
Scroll down
to Save
Select an action
from the menu
33
Advertisement
Table of Contents
