Table of Contents
Advertisement
2
Basic Operation and Configuration
2.2.1
The D-Series camera is shipped with a static IP address: 192.168.250.116. Assuming the existing
network uses IP addresses that are unique and different than the default address on the camera,
configuring the camera for IP communications generally involves the following steps:
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
427-9030-01-12 Version 140
Set IP Address using the FLIR Discovery Network Assistant (DNA)
Connect the Ethernet port of the camera to the existing IP camera network.
Connect a PC or laptop to the same network.
From the PC connected to the camera network, use the DNA utility to discover and display
the camera's current IP address.
a
Download the DNA utility.
b
Unzip the utility, then double-click to run the executable file (
the VLAN are discovered.
c
For additional instructions on using DNA, refer to the DNA User's Manual available in the
Help (
) link while the software is running.
Click to sort
Select Assign IP
to change the IP
address or to set IP addressing to DHCP.
Double-click the camera in DNA's
Discovery List to open the camera's web
server Login page in Internet Explorer or
point your web browser to the camera's IP
address.
Using a web browser, configure the camera
settings, such as camera date/time, and
other parameters, so the camera is
compatible with the existing network.
March 2018
DNA.exe). All the units on
Online manual
Select a filter
Right-click
Select Assign IP
14
Advertisement
Table of Contents
