2
Basic Operation and Configuration
Contrast (Max Gain) can be used to increase contrast, especially for scenes with little
•
temperature variation (it may also increase noise due to increased gain).
•
Sharpness (DDE Gain) is used to enhance image details and/or suppress fixed pattern noise.
Positive values increase Sharpness, while negative values soften the image and filter fixed pattern
noise. A setting of 0 is neutral and will not have any effect.
•
AGC Filter determines how quickly a scene will adjust when a hot object appears (or disappears)
within the AGC ROI. If set to a low value, when a hot object enters the ROI, the AGC will adjust
more slowly to the hot object, resulting in a more gradual transition.
Pan and Tilt
The azimuth and elevation angles are measured in degrees. The elevation angle is measured from
horizontal; negative values are down, positive values are up. The Azimuth angle is measured from the
front of the pan/tilt unit; negative values are counter-clockwise, positive values are clockwise.
427-9030-01-12 Version 140
March 2018
Current camera
coordinates and
pan/tilt mode
To move the camera:
enter coordinates,
click Go to
22