Table of Contents
Advertisement
2
Basic Operation and Configuration
AUX OFF 2
AUX ON 3
AUX OFF 3
AUX ON 4
AUX OFF 4
AUX OFF 5
AUX ON 6
AUX OFF 6
AUX ON 7
AUX OFF 7
AUX ON 8
AUX OFF 8
AUX ON 9
AUX OFF 9
Preset Map File: Most pan/tilt cameras support predetermined pan/tilt locations that are stored as
"presets'. A collection of presets is known as a Scan List (also referred to as a Pattern or Tour), A Scan
List is used to direct the camera to a sequence of locations that are typically viewed, or are considered
important or high-priority. Using video management software (VMS), multiple scan lists for a camera
can be set up and scheduled according to time of day and other factors.
However, presets can also be used to access other functions. The camera is capable of storing up to
128 Presets, but generally not that many are needed, so some presets can be reassigned to access
the other functions. For keyboards that do not have the Aux buttons, camera presets can be used to
accomplish the extended functions described above. For example, if preset 41 is not being used for an
actual preset location, it can be mapped to one of the above functions, such as IRPolarityBlackHot. To
allow mapping of the serial functions, set the "Use Preset Map File" parameter to yes.
On the Files page under PelcoD Map, use the Download link to open the text file that is used for
mapping the functions to Aux commands and Presets. If it is necessary to change the mapped
functions, edit the file and upload the new map file to the camera using the Upload button. Once a file
has been edited and tested, it can also be uploaded to other cameras so that each camera operates
the same way.
427-9030-01-12 Version 140
Table 2-2: Aux Functions (Continued)
IRChangeActiveSource
TogglePlateauValue
IRToggleAGCType
ToggleAutofocus
IRStartNUCCalibration
IRToggleLUTPalette
IRToggleDDEGain
IRToggleAGCROI
IRToggleFOV
IRToggleAGCMaxGain
SwitchCameraOn
SwitchCameraOff
InitializePT
GoToParkPosition
March 2018
31
Advertisement
Table of Contents
