Set Up Network Access; Verify Network Communication - DataCard CR805 Installation And Administrator's Manual

5.
Press the down arrow until Test Card displays on line 2.
6.
With Test Card displayed on line 2, press E
on line 2.
7.
Press E
NTER
After the card prints, the printer returns to Ready.

Set Up Network Access

Work with your network support personnel to make sure that the printer is set up within your
organization.
You may need to perform the following tasks:
Know the IP address of the printer.

Set up network security.

Define network permissions to the printer.

Your organization is responsible for network setup and security.

Verify Network Communication

Access Printer Manager to verify that your computer and the printer can communicate over the
network. You also can use Printer Manager to perform other printer setup tasks, as necessary.
Refer to Chapter 3: "Printer Manager"
40
to print the test card.
for complete information about using Printer Manager.
to display Start
NTER
Printer Installation