Table of Contents
Advertisement
SECTION 1 - SAFETY PRECAUTIONS
• Exercise extreme caution at all times to prevent
obstacles from striking or interfering with operating
controls and persons in the platform.
• Be sure that operators of other overhead and floor
level machines are aware of the aerial work
platform's presence. Disconnect power to overhead
cranes.
• Warn personnel not to work, stand, or walk under a
raised extending structure or platform. Position
barricades on floor if necessary.
1.4
TOWING, LIFTING, AND HAULING
• Never allow personnel in platform while towing,
lifting, or hauling.
• This machine should not be towed, except in the
event of emergency, malfunction, power failure, or
loading/unloading.
Procedures section of this manual for emergency
towing procedures.
• Ensure extending structure is in the stowed position
prior to towing, lifting or hauling. The platform must
be completely empty of tools.
• When lifting machine, lift only at designated areas of
the machine. Lift the unit with equipment of
adequate capacity.
• Refer to the Machine Operation section of this
manual for lifting information.
1.5
ADDITIONAL HAZARDS / SAFETY
• Do not use machine as a ground for welding.
• When
performing
operations, precautions must be taken to protect the
chassis from direct exposure to weld and metal
cutting spatter.
• Battery fluid is highly corrosive. Avoid contact with
skin and clothing at all times.
• Charge batteries only in a well ventilated area.
1-4
Refer
to
the
Emergency
welding
or
metal
cutting
– JLG Lift –
31210031
Advertisement
Table of Contents
