JLG Toucan 800 Operation And Safety Manual page 24

SECTION 3 - MACHINE CONTROLS AND INDICATORS
1. Platform / Off / Ground Selector Switch
Movement Control from the Platform Controls
Control Circuit Off Position
Movement Control From The Ground Controls
2. Emergency Stop Switch.
Depress the switch to stop all functions. The
switch must be turned clockwise to restore the
machine's function.
3. Function Enable Switch.
Must be pushed and held to operate any function.
4. Jib Up / Down Switch.
Move the switch UP to RAISE the jib. Move the
switch DOWN to LOWER the jib.
5. Mast Up / Down Switch.
Move the switch UP to RAISE the mast. Move the
switch DOWN to LOWER the mast.
6. Turntable Slewing Switch.
Move the switch to the RIGHT to slew the turntable
to the RIGHT or to the LEFT to slew the turntable
to the LEFT.
7. Charger Indicator
(Depending on equipment, see § 4-6)
8. Circuit Breaker.
Protection of the control circuit.
9. Overload Indicator
Flashing red light indicator.
10. Battery Filling Pump Switch.
Depress the push button to activate the battery
filling pump.
(See Maintenance section for further instructions).
11. Main Circuit Breaker
T800 : Position the circuit-breaker to its "O" position
(horizontal lever) to insulate the battery "+".
Position the circuit-breaker to its "I" position (vertical
lever) to restore battery supply.
T870 : Push the circuit breaker knob to insulate the
battery.
Pull the circuit breaker knob to restore the battery
supply.
3-4 – JLG Lift – 31210031