User Parameters; Auto Power Off - Adam Equipment CPWplus 6 Manual

8.0 USER PARAMETERS

The scale can be set as desired by the user to control the operation.
• Switch off the scale.
• Hold the [Tare/Zero] key and then press the [On/Off] key
momentarily. Release the [Tare/Zero] key. The display shows the
first function "Pr oFF" i.e., Auto Power Off.
• The user can escape from the parameter setting at any time by
pressing the [Print/Hold] key.
• To scroll through all the User Parameters, press the [Unit] key
(which will advance to the next parameter).
• To return to normal weighing, turn the scale off and back to on again
or press the [Print/Hold] key.
8.1

AUTO POWER OFF

• The first function is to set the auto power off function. The display
will show "Pr oFF" or "Pr on" DEFAULT SET: Pr oFF
• Press [Tare/Zero] to toggle between "Pr on" and "Pr oFF".
• Press the [Unit] key to confirm the selection and move to the second
function on setting of backlight
"Pr on" setting enables the Auto Power-off function. The power will be
turned off after 2 minutes if a key has not been pressed for 2 minutes and
the scale is at zero. If there is any weight on the scale or a key is
pressed, the scale will continue to work.
"Pr oFF" setting disables the Auto Power-off function. The scale will not
automatically turn off.
© Adam Equipment Company 2006
13