Related Manuals for Adam Equipment CB 501
Summary of Contents for Adam Equipment CB 501
- Page 1 Adam Equipment CB Balance (P.N. 700660246 – Revision B1, Apr 2014) Adam Equipment Company 2014...
- Page 2 Adam Equipment Company 2014...
- Page 3 CONTENTS INTRODUCTION ..............1 KEY OPERATIONS ............1 CALIBRATION ..............2 MODEL SPECIFICATIONS ..........2 Adam Equipment Company 2014...
-
Page 4: Key Operations
Remove the cover on the underside of the balance to fit new batteries. 2.0 KEY OPERATIONS Power on/off key. Weighing mode selection key (if enabled) – g, oz or lbs. Zero key is used to zero the balance or remove the weight of an empty container. Adam Equipment Company 2014... -
Page 5: Model Specifications
5 x 12mm/0.47 inches high digits Pan Size 130mm/5.1 inches diameter Overall 160 mm x 210mm x 65mm Dimensions 6.3 in x 8.1 in x 2.6 in (w x d x h) Net Weight 385 g / 0.85 lbs Adam Equipment Company 2014... -
Page 6: Warranty Information
WARRANTY INFORMATION Adam Equipment offers Limited Warranty (parts and labour) for the components failed due to defects in materials or workmanship. Warranty starts from the date of delivery. During the warranty period, should any repairs be necessary, the purchaser must inform its supplier or Adam Equipment Company. -
Page 7: Fcc Compliance
(EEE) by European Directive 2002/95/EEC and must NOT be thrown into general waste but should be collected separately and properly recycled under local regulations. Adam Equipment Co. Ltd. is dedicated to minimizing the impact our products have on the environment and to complying with the WEEE Directive and any amending legislation. - Page 8 For a complete listing of all Adam products visit our website at www.adamequipment.com © Copyright by Adam Equipment Co. Ltd. All rights reserved. No part of this publication may be reprinted or translated in any form or by any means without the prior permission of Adam Equipment.