EN
3.4 REMOTE
CONTROL
The remote control works via infra red and can be used to operate the SHS from
long distances. It operates using 2 x AAA batteries and these can be exchanged by
unclipping a cover on the rear of the remote control unit.
3.5
USER
PARAMETERS
Four USER settable parameters are available on the SHS, to access these power
up the scale and whilst the display is counting down press and then release the
[Unit] button. The display will show Bee 0. Press the [Hold] button to change the
setting, and the [Zero] button to move to the next parameter.
Parameter setting table.
FUNCTION
EE
B
H
OD
CH
T
YES
© Adam Equipment Company 2012
UNIT
DESCRIPTION
Sets buzzer
0: Disable
1: Enable
Sets the Hold function
0: Peak
1: Standard
Sets weighing unit on power up
0: kg
1: Lb's
2: Newtons(Newtons not available for "a"
models)
Sets save:
0: not saved
1: save new settings
9
7.00.6.6.0202, Revision B November 2012
DEFAULT
1
1
0
0