User Parameters; Rs 232 Parameters - Adam Equipment BCT Series Manual

2. Choose the right com port, Click "download file"
if succeed, will show "Success".
7.0

USER PARAMETERS

To access the user parameters menu, press the [PLU] key and the [CE/ BACKLIGHT]
key at the same time to enter the user parameter setting, the display will show the first
parameter "P1 TRA", this is RS232 communication setting.
In this menu. Pressing the [PRINT] key will enter the next parameter. Pressing the [PLU]
key will enter the sub parameter setting. Alternatively, the user can press the number key
that links to a corresponding sub parameter setting. For example, in "T1 FC", press [3],
the display will jump to "T3 bps". Press the [M+] key use to choose the right parameter
options.
7.1

RS 232 PARAMETERS

The RS232 parameters are divided into two categories: P1 TRA and P2 FUN.
P1 TRA – Communication settings
Parameter Definition
T1 FC Communication mode: Continuous transfer
mode, stable transfer mode and response.
T2 Add Communication address, effective in multi-
machine communication.
T3 Bps Communication baud rate
T4 Fmt This parameter can be set to: n81 check bit/o71
data bit /e71 stop bit.
T5 PFM Label format. Set to 0, can print out the format
which named FORMCOIN LP-50. For LP-50,
please choose 0 or 1.
© Adam Equipment Company 2019
Options
1-6
1-20
2400, 4800, 9600,
38400, 56000, 115200
N81
O71
E71
0-19
19200,